Skip to main content

Page last checked

Reconstitution · Mazdutide

Mazdutide reconstitution calculator

Pick the vial, the water you added and the dose. Get the exact draw in units for the syringe in your hand.

Step 1 of 4

  1. How many mg are in your vial?
    Vial amounttotal mg in the calculation
  2. How many mL of water did you add?
  3. What dose do you want to convert?
  4. Which syringe are you using?
Draw to
80.0units

0.80 mL in the syringe · 2 calculated doses from this amount

80.0 units on a U-100 insulin syringe · 1 mL · lines every 2 units, which is 0.80 milliliters. The draw lands on a syringe line.

Easy to read on this syringe. The calculated volume matches the 80-unit line. No rounding is needed.

10 mg ÷ 2 mL = 5.00 mg/mL
→ 50 mcg/unit · 4 mg = 0.800 mL = 80.0 units

Your address is used to send this one card. The email also includes an optional link for updates when our data changes. Nothing else is sent unless you choose that link, and you can unsubscribe anytime.

Show the math and syringe details

Can this syringe show the result clearly?

Easy to read on this syringe. 80.0 u is exactly the 80-unit line on a U-100 — no rounding error at all.

Want an easier syringe number?

This setup is already easy to read. Changing the water between 0.5 and 3 mL would not put 4 mg closer to a line on this U-100 syringe.

Adding more water makes the mixture less concentrated, so the same dose uses more syringe units. It does not change how much peptide is in the vial.

This setup is in the address bar — every input is part of the link.

Educational math, not medical advice — dosing decisions belong to a licensed clinician. The available tabs also show supply calculations and any sourced schedule.

How to use the calculator

  1. 1

    Enter the amount in the vial

    Use the total mg printed on your Mazdutide vial.

  2. 2

    Enter the water you added

    Use the amount of water added to that vial, in mL.

  3. 3

    Enter the dose you want to convert

    Choose mg or mcg, then match the result to your syringe.

Mazdutide is a once-weekly injection that works on two hormone receptors at once, GLP-1 and glucagon. It is the same class idea as tirzepatide, with a different second target. In China it is prescribed for weight and for type 2 diabetes. Everywhere else it is sold online to people who want the newest weight-loss injection.

The trial program is large, and every trial in it was run in China. Two phase 3 trials compared it against placebo and reported substantial weight reduction. An independent review of nine trials says longer-term, multi-ethnic data is still needed. Nobody outside a Chinese pharmacy is getting the approved product.

Examples using 10 mg of Mazdutide

Each row uses 10 mg and the liquid volume shown. Dividing the amount by that volume gives the calculated concentration. The rows are arithmetic examples, not alternative product preparations.

◆ How liquid volume changes the resultdose used: 4 mg

With 1 mL bacteriostatic water

40.0 units

Concentration
10.00 mg/mL
Each U-100 unit
100.0 mcg
Syringe volume
0.400 mL
Nearest line
Exactly 40 units

With 2 mL bacteriostatic water

80.0 units

Starting example
Concentration
5.00 mg/mL
Each U-100 unit
50.0 mcg
Syringe volume
0.800 mL
Nearest line
Exactly 80 units

The amount, liquid volume and dose shown here are the calculator’s starting example for Mazdutide. Replace them with your own values. Every result in the table is calculated from those inputs.

Drawn from once a week at 4 mg, a 10 mg vial yields 2 doses — about 2.0 weeks of supply. No storage limit is assigned to this example. Follow the dispensing label for the specific product.

Mazdutide: a worked example, not a product listing

This page uses one example vial amount and two water volumes to explain mazdutide calculations. The example is not evidence that a vial with that strength is sold. Its result depends on the inputs shown.

Open the mixing details3 notes

The preset describes this calculation only

The mazdutide vial amount is a worked example in this reference. It is not a verified product strength or a preparation instruction. Selecting it fills the calculator fields so you can see how the conversion works.

If the amount on a vial differs from the example, that difference matters before any unit count is used. Changing the vial amount while leaving the dose and water unchanged changes the concentration, and therefore the volume reported by the tool.

A result on a syringe line can move between lines

At the opening dose, both listed water volumes give results on a reference syringe line. This comes from that particular combination of inputs. It does not mean every mazdutide calculation will land on a syringe line.

Changing the dose may produce another exact mark or a result between marks. Read the new result and its measurement details rather than assuming the opening example still applies. The syringe display distinguishes the calculated volume from the available markings.

A larger volume can exceed the syringe capacity

For the same vial amount and dose, the more dilute example requires more liquid. As the entered dose increases, the required volume can exceed the capacity of the selected syringe. The capacity warning marks that limit.

The warning is not a recommendation to make a stronger solution or divide the amount between syringes. It explains why that combination does not fit. Nor does a successful calculation establish the preparation, storage conditions or treatment schedule for a mazdutide product.

Mazdutide study doses need their trial context

The mazdutide amounts in the reference come from clinical studies. They describe specific groups, treatment periods and research questions. A figure in the calculator is not a complete set of product instructions.

Read the supporting evidence3 supporting notes

The weight-loss trial compared weekly dose groups

The cited study in China compared mazdutide with placebo in adults with overweight or obesity. It measured weight change over many months. Its findings apply to the studied treatment, rather than to any preparation bearing the same ingredient name.

Dose and vial strength answer different questions

A trial amount states how much participants received. Vial strength states how much a container holds. The calculator needs the latter as well as the liquid volume; a published trial dose cannot fill in either missing value.

A result beyond syringe capacity is a limit

When the entered values require more liquid than the selected syringe holds, the tool reports that mismatch. It does not choose a different dose, mixing volume or number of injections to resolve it.

Units to dose at 5.00 mg/mL

Mix 10 mg into 2 mL and one U-100 unit carries 50.0 mcg. The table shows how much peptide is in each numbered syringe line. These are conversion examples, not suggested doses.

Open the unit conversion table10 rows
Numbered U-100 syringe lines converted to volume and mass at 5.00 milligrams per milliliter.
U-100 lineVolumeMass (mcg)Mass (mg)
10 u0.10 mL500 mcg0.5 mg
20 u0.20 mL1,000 mcg1 mg
30 u0.30 mL1,500 mcg1.5 mg
40 u0.40 mL2,000 mcg2 mg
50 u0.50 mL2,500 mcg2.5 mg
60 u0.60 mL3,000 mcg3 mg
70 u0.70 mL3,500 mcg3.5 mg
80 u0.80 mL4,000 mcg4 mg
90 u0.90 mL4,500 mcg4.5 mg
100 u1.00 mL5,000 mcg5 mg

How the math works

  1. Concentration — divide the amount entered by the liquid volume used in the calculation: mg ÷ mL = mg/mL. This tells you how many mg are in each mL.
  2. Volume — the dose divided by that concentration: dose ÷ (mg/mL) = mL.
  3. Units — on a U-100 syringe one unit is 0.01 mL, so mL × 100 = units. A U-40 unit is 0.025 mL, so the wrong barrel is a 2.5× error. That is why the calculator asks which one you have.
  4. Rounding gap — the exact draw against the nearest syringe line: |exact − nearest line| ÷ exact × 100 = % difference.

Medically reviewed by Kenneth Montecillo, MD2026-09-07open the primary sources

Useful guides for this calculation

The math is only one part of the question. These guides cover the compound, published doses, side effects, mixing steps and supplies.

How the mazdutide trials escalated to their top arm

The strongest dose source for mazdutide is a published human trial.

Mazdutide side effects, as the sources describe them

When mazdutide reactions tend to appear, tied to that compound’s own escalation steps.

Mazdutide — class, half-life and regulatory standing

No approved brand name is listed for mazdutide.

The 10 mg mazdutide vial: concentrations and example draws

A 10 mg mazdutide vial and a differently sized one are genuinely different arithmetic.

Choosing bacteriostatic water for a mazdutide draw

What is in bacteriostatic water? The answer holds for mazdutide as it does for anything else in a vial.

The Hospira vial for a mazdutide vial

The Hospira vial is the second thing the mazdutide calculator asks you for.

5primary sources, each with the day we read it — open the documents used on this page